Kremlin paint sprayer guns are a popular choice to get started with your painting ventures. It is a versatile, durable, and efficient machine. It has received immense admiration from both professional painters and beginners who are just starting. Kremlin paint gun is not a complex machine, and no qualification is required to bring it into use. If you are new to painting, it’s best to start with a simple guide to get to know your machine and its working.
Let’s start our step-by-step guide on using the Kremlin paint sprayer gun, and all the tips and tricks you need to know to bring it into functioning;
Start with Assembling Your Gun
Start with assembling your Kremlin sprayer gun. You’d want to carefully go through the manufacturer’s instructions that come in a manual along with the gun. Assembling the gun is not difficult, especially if you carefully examine all the parts of your gun and attach them correctly.
The gun handle needs to get attached to the main body. All the fittings must be tightened to secure the connections.
Preparation of the Paint
The second step is to prepare the paint. Carefully read the manufacturers’ instructions on how to mix the paint, you have to know the ratio of the paint thinner as well as the type of thinner recommended for the gun.
The preparation of paint does not end on mixing the paint with the right thinner, the final step is to free the mixture from any impurities. A mesh filter or a paint strainer is usually used to strain the paint. It is a crucial step, the impurities that remain in the paint might clog the filter or the nozzle of your gun, resulting in problems every painter discourages.
Adjust the Settings of Your Sprayer
Once your gun is assembled and the paint is prepared, the next step is to adjust your gun and customize it for the job required of it. The common settings that you need to look into are; pressure adjustment, flow rate, and spraying pattern.
Read the manufacturers’ instructions carefully to know the Sprayer parts that require adjustment along with the right procedure. Pressure is adjusted via the pressure regulator present on the gun, adjust it to the recommended levels.
The fluid flow rate or paint flow rate is adjusted via the fluid control knob present on your sprayer. It allows you to control the flow of the fluid. It is a great feature, especially for beginners, as they have little to no experience in controlling the speed at which their fluid flows. It’s easier to adjust it from the sprayer than learning it via experience.
Finally, the spraying pattern can be adjusted to your desired shape and size. Hence, the Kremlin paint sprayer allows full control over your gun, making your painting experience efficient and smooth.
Test Your Gun, and Start Spraying
Testing your sprayer on rough cardboard before you start at your targeted surface is important. It will allow you to check the pressure and the flow rate of your gun, which can then be adjusted as per the need. In addition to the flow rate, check the consistency of the paint and how it appears on the surface.
Once you have tested your paint gun on scrap material, it’s time you start spraying. Get a firm grip on your gun and keep it 6-8 inches away from the surface. Start spraying, and move your gun back and forth overlapping each stroke.
You’d want to keep your gun at a consistent speed and distance to generate uniform strokes of paint on the wall. It saves you from over-layering of paint and ultimately paint wastage.
Another important thing is the angle at which you hold your gun. For walls and flat surfaces, hold the gun at 90 degrees or perpendicular to the surface, for the corners and curves however, adjust it according to the shape of the surface.
Clean Your Sprayer Once You’re Done
Cleaning the sprayer right after every use is important for the longevity, functioning, and performance of your paint sprayer. Cleaning it thoroughly with water is important to prepare it for the next use. If you do not properly clean your sprayer gun after every use, it might affect the performance of your sprayer due to clogs.
A thorough cleaning requires dissembling the spray gun and washing every part with a sufficient amount of water. After rinsing with water, dry it with a towel or cloth to protect it from moisture. Now, reassemble your sprayer and store it in a cool, moisture-free, and dry place.
Conclusion
Kremlin Paint Gun is a durable and efficient machine that can proficiently handle both commercial and residential paint projects. Using it requires no training or qualification, tips and tricks would make you a pro painter.
It’s important to consult the manufacturers’ instructions before you assemble your gun, as well as when you adjust the settings of your gun according to your project. Happy painting with Kremlin!
