Category: Titan Sprayer parts

Repacking Titan 805-236A Fluid section assembly for Titan 840 and 740

Posted 4 months ago

Repacking Titan 805-236A Fluid section assembly for Titan 840 and 740

 

Begin by removing the foot valve assembly and the lower housing.  By following these procedures:

  1. Loosen and remove the foot valve housing from the lower housing.
  2. Clean out any debris in the foot valve housing and examine the housing and the foot valve seat. If the seat is damaged, reverse or replace the seat.
  3. Using two wrenches, hold the upper housing at the wrench flats with one wrench and loosen the lower housing with the other. Remove the lower housing.
  4. Using a 3/8” wrench, loosen and remove the outlet valve retainer from the piston rod.

Please note that the outlet valve does not require disassembly from the piston rod during this procedure.

Rotate the fluid section counterclockwise to detach it from the gearbox housing.

Secure the upper housing upright in a vise, taking care not to over-tighten to prevent damage.

Utilizing a wrench, remove the upper seal retainer.

Slide the piston rod forward until the piston is out of the T-slot on the slider assembly.

Extract the Titan 805-437A Piston rod through the bottom of the upper housing.

Inspect the piston rod for wear and replace if necessary.

Remove the upper and lower packings from the upper housing, being careful not to damage the upper housing during the process.

Reassembly of the Parts

Clean the upper housing and inspect it for damage, replacing if needed.

Unwrap the upper packing and preform tool, using scissors to cut the plastic wrap (avoid using a utility knife to prevent damage to O-rings).

Slide the upper packing off the sizing/insertion tool towards the tip and install it into the top of the upper housing with the raised lip on the packing facing down.

Insert the spacer on top of the upper packing.

Thread the upper seal retainer into the upper housing and torque it to 25-30 ft. lbs.

Pre-form the lower packing using the lower packing sizing tool included in the repacking kit.

Install the lower packing with the side containing the O-ring closest to the face of the packing facing up.

Partially insert the lower packing into the bottom of the upper housing so that the O-ring side faces up.

Use the lower packing insertion tool to push the lower packing into position.

Place the piston insertion tool over the top of the piston rod.

Insert the piston rod into the bottom of the upper housing, through the lower packing, upper packing, and out through the upper seal retainer.

Ensure the raised lip on the bottom of the lower packing is fully outside the packing around the piston rod after insertion.

Remove the piston insertion tool from the top of the piston rod.

Slide the top of the piston rod into the T-slot on the slider assembly.

Turn the knock-off nut counterclockwise until it is flush against the upper housing.

Lubricate the threads on the upper housing with anti-seize compound, remove the upper housing from the vise, and thread it into the gearbox housing clockwise.

Continue turning the upper housing clockwise until the knock-off nut is flush against the gearbox housing.

If the nipple on the upper housing does not face the back of the unit, turn the upper housing counterclockwise until it does, avoiding more than one full turn.

Once the nipple is in position, turn the knock-off nut clockwise until it contacts the gearbox housing.

Tap the knock-off nut with a soft hammer to tighten it against the gearbox housing.

Ensure the Viton O-ring and PTFE back-up ring are lubricated and in place, then thread the lower housing into the upper housing. Use two wrenches to hold the upper housing at the wrench flats and tighten the lower housing.

Attach the high-pressure hose to the nipple on the back of the housing and tighten it with a wrench, avoiding kinking the hose.

For low rider units, ensure the hose does not touch the cart frame. If it does, reposition the nipple by turning the upper housing until the hose is clear of the frame, and the nipple is within 45º of the back of the unit.

Ensure the Viton O-ring and PTFE back-up ring are lubricated and in place, reassemble the foot valve assembly, and thread it into the lower housing securely.

Thread the siphon tube/siphon set into the foot valve and tighten it securely. Remember to wrap the threads on the down tube/siphon tube adapter with PTFE tape before assembly.

Replace the return hose into the clamp on the siphon tube.

Place the front cover on the gearbox housing and secure it in position using the four front cover screws.

Turn on the sprayer by following the procedure in the appropriate procedure and check for leaks.

Please note that a repacking kit with part number Titan 805-1010 Pump Repair Kit is available for this process.

 

 

 

 

 

AMSPRAY PAINT SPRAYERS FOR PROFESSIONAL USE

Posted 8 months ago
 2 Sep, 2023 AmSpray paint sprayers

Efficiency, quality finish, and precision are touchstones of successful painting projects. Over the years, the painting industry has shifted to innovation. Innovative tools and equipment elevate the proficiency and standard of the work. Tools have thus, become important to achieve impeccable results. Among these tools, AmSpray paint sprayers have become the go-to choice of professionals. These sprayers offer all the features required for a professional-grade paint sprayer. The efficiency, precision, and quality of the finish make them a leading brand for sprayers.

In this blog, we will delve into the world of AmSpray paint sprayers. Let’s see what makes them an ideal choice for the pros in the industry.

What are AmSpray Paint Sprayers?

AmSpray paint sprayers are powerful machines. This unmatched power to atomize the paint particles at a higher pressure leaves a very fine and even layer of paint on the surface. Unlike the traditional methods of painting, where brushes and rollers were used, paint sprayers are far more efficient and time-saving.  Paint sprayers offer smooth and uniform application giving intricate details to your finishes.

Why Choose AmSpray for Professional Use?

Precision and Quality

The hallmark of professional painting is precision and quality finishes. AmSpray add details to your finishes leaving smooth and fine paint application on the surfaces. The precise application results in fewer drips, runs, and splotches, ensuring a finish that impresses the clients.

Efficiency and Speed

In the professional painting world, time is money. AmSpray offers a much faster application of paint than the brushes and rollers. The efficiency of the machine depends on its speed, the shorter the timeframe, the more efficient is the machine. Increased Efficiency ultimately results in increased revenue in a shorter timeframe.

Versatility

Every professional painter is looking for versatility, when on search for a pro paint sprayer. AmSpray can handle multiple paint materials, and you do not have to buy separate sprayers for your different projects. From thin stains to latex, it proficiently atomizes thick and thin materials through the nozzle onto the surface. Versatility ensures professionals require fewer tools and can do a wide variety of projects.

Reduced Waste

Traditional methods of painting; brushes and rollers, wasted a lot of paint in the painting process. AmSpray paint sprayers atomize the paint particles directly onto the surface, and therefore, limit material wastage.

Features that Set AmSpray Apart

Adjustable Pressure Controls

Customizable pressure also adds to the versatility of the sprayer. Different projects require different levels of pressure. AmSpray offers adjustable pressure controls so, that professionals can tweak the pressure settings as per the demand.

Easy Maintenance and Cleaning

AmSpray paint sprayers are designed with professionals in mind. Therefore, they are easy to disassemble and easy to clean.

Durable Construction

Professionals in the painting industry have rigorous demands, so their tools must be durable. AmSpray paint sprayers are made with high-quality materials. These sprayers are built to last as well as, can withstand daily use by professionals.

Ergonomic Design

Long hours of painting can be quite strenuous for the painters. AmSpray paint sprayers’ ergonomic design ensures that the machine is comfortable to hold. This reduces the fatiguing process and painters can comfortably paint for long hours without straining their hands.

Tips for using AmSpray Paint Sprayers Professionally

Proper Preparation

Before you set on your painting venture, make sure the area/surface is well-prepped. Cover all the surfaces that you do not want to be painted. Preparation before you start painting ensures a clean job. It also minimizes the after-clean-up time.

Practice

If you are new to painting, or AmSpray painting, you must spend some time practicing. You can practice on scrap materials and cardboard. This helps you in understanding the nature and functioning of the sprayer. It also aids you in tuning the sprayer as per the requirement of the task at hand.

Consistent Motion

Professionals are well aware of this technique. If you are new, you should also work on this part. Consistency in the motion of the sprayer brings smoothness and quality to your finishes. Remember, it’s all in the technique.

Regular Maintenance and Cleaning

Cleaning the sprayer thoroughly after every use is the key to adding longevity to the lifespan of your sprayer. This prevents paint build-up in the sprayer and ensures that the superior quality of your sprayer is preserved.

Final Thoughts

The right tools and equipment can make all the difference in the dynamic world of painting. AmSpray paint sprayers with the blend of precision, versatility, high-quality performance, and efficiency are a testament to this fact.AmSpray is not just a tool in the painting industry. By choosing it, the professionals are trusted partner that promises exceptional results on every use. AmSpray paint sprayers will always pay off in efficiency, quality, and client satisfaction.With enhanced proficiency, the AmSpray paint sprayer is a win-win game for professionals and contractors in the painting industry. It not only offers superior results but also is a time-saving machine.

Choosing the Best Titan Paint Sprayer Parts for Your Project

Posted 8 months ago
 29 Aug, 2023 Titan paint sprayer parts

Paint sprayers have revolutionized the world of painting. They provide the efficiency, consistency, and precision that rollers and brushes simply cannot match. While the market is flooded with sprayers, Titan stands out as a leader. Known for its high-quality sprayers that are designed for both professional-grade and DIY projects, Titan rules the industry. However, like all the machinery, Titan paint sprayer parts require optimal maintenance and occasional replacement.

Whether it’s a professional project or a DIY venture, choosing the right Titan paint sprayer parts can have a significant effect on the outcome. This comprehensive guide will walk you through the tips and tricks to choose the right replacement parts for your Titan sprayers.

Understand your Sprayer Model

Before diving into the sea of replacement parts, you need to understand your Titan sprayer model. Each model is unique. It has unique functionalities, unique designs and even unique parts.

Once you have familiarized yourself with your sprayer model, you can get your hands on the correct user manual and parts diagram. The parts diagram has a complete list of all the components of your paint sprayer as well as, their specific function.

Determine the Part You Need

Titan paint sprayer is composed of different components. From nozzles and tips to filters and seals, every component is different. Here are some common parts that require occasional inspection and replacements;

Filters

Filters are important components that prevent dirt and debris from marring your finishes. Regular replacements of filters ensure you get a smooth finish every time.

Tips and Guards

Tips and guards control the flow and the pattern of the paint. Different sizes of tips are available to offer you a customized experience with every project.

Seals and O-rings

Seals and O-rings are responsible for giving you a leak-free painting experience.

Hoses

The higher the quality of the hose, the smoother the flow of the paint through the sprayer. Occasional replacements of the hoses ensure your safety from leakages and streamline the flow of paint through the paint sprayer.

If you are experiencing trouble with these components of your sprayer, you can consult the troubleshooting section of the user manual. In this way, you can trace the problem back to the part involved.

Prioritize Quality

Quality cannot be compromised, especially when it’s about machinery parts. Always opt for genuine parts rather than knock-off versions or generic parts. Genuine Titan parts should be your prime preference.

Genuine parts not only ensure compatibility but also the performance and longevity of your machine. Ultimately, genuine parts guarantee you superior performance and the best finishes.

Take Maintenance Seriously

The best way to keep your machine working optimally is by taking maintenance seriously. Adhering to your maintenance routine not only amplifies the efficiency of your machine, it brings down the frequency of part replacement.

Clean your paint sprayer thoroughly after every use. Make sure that your cleaning is such that your sprayer is free from all the paint. Thorough cleaning can prolong the life of seals, filters, and tips. Furthermore, periodically inspect your machine for wear and tear. Preemptive replacements save you from downtime and upgrade the efficiency of your machine.

Consider Buying in Kits

Buying parts in kits is both convenient and economical. For instance, Titan offers kits that include seals, and O-rings. Seals and O-rings are commonly replaced parts. Buying both the parts in kits saves you time in the long run, and can prove economical as well.

Consult Experts and Reviews

If you are not sure about which part to use for your project, you can always consult Titans’ customer service. Titan is a trusted brand in the industry and has the best team of experts ready to solve your queries and ambiguities.

If you do not want to reach out directly to Titans’ customer service, there are a plethora of online forums that you can consult. The painting community can offer invaluable insights based on their years of experience and expertise in the field. Furthermore, they can also recommend different parts to streamline your painting process.

The online community is the most accessible for the reviews. If you want reviews about a certain part, you’ll always find expert reviews based on the personal experiences of people.

Plan Ahead

Professional painters and contractors should have some replacement parts on their hands. Especially, for those, who use paint sprayers a lot. This minimizes the downtime, if your paint sprayer breaks out.

Conclusion

Titan Paint sprayer is a valuable investment, an asset to be precise. Choosing the right parts can make the world of a difference in efficiency and performance. By prioritizing genuine parts, understanding the needs of your sprayer, and forming a maintenance schedule, you can ensure the lifespan and optimal performance of your sprayer in the coming years.

Whether you are a weekend warrior or a seasoned pro, replacing your sprayer with the right Titan parts can elevate your painting game to new heights.

Reliable Suppliers of Airless Paint Sprayer Parts near Me

Posted 8 months ago
 28 Aug, 2023 Airless paint sprayer parts near me

TIn the painting industry, the right tools can make all the difference. Be it home renovation projects or professional projects on industrial and commercial grounds, equipment is of supreme importance. One such tool is the airless paint sprayer, which holds a paramount position in the painting world.Airless paint sprayers have revolutionized the industry. By delivering smooth, and fast spraying, they have become elite in the market. But like any tool, non-functional damage and wear and tear over time can render these super machines. Airless paint sprayer parts near me are the top search of all the painters who are searching for a reliable replacement of parts. Let’s delve into the comprehensive guide to understand the intricacies of the sprayers. As well as, what to consider while finding reliable airless paint sprayer parts neighboring you.

The quality of the Parts is of Prime Importance

Quality is paramount while searching for replacement parts. A subpar replacement part can drastically reduce the proficiency of your sprayer. Not only the efficiency, but also brings down the life span of your machine.

Furthermore, it leads to frequent malfunctions in the machine. Sometimes, users are left with complete failure of the device. The damages that start from uneven application of paint end up in a complete loss of function.

Therefore, investing in quality replacement parts is of supreme importance. It not only ensures the functionality of the sprayer but also enhances its longevity.

Leading Brands

Several international brands that are elite in both airless paint sprayers and their parts are available. Brands like Titan, Graco, and Wagner have established themselves as leaders in the industry. These companies have distributors spread across the world. Finding a reliable and genuine replacement part is not a hassle anymore.

Titan

Titan is synonymous with performance and durability.  Parts of Titan are available internationally through their extensive network of distributors spread across the world.

Graco

Graco is known for its premium-quality airless paint sprayer and parts. Its network is spread widely across the world with authorized dealers ready to serve. Whether you are in Colombia or British Quebec, chances are Graco dealers are near you.

Wagner

Wagner is known for its diversity. It offers a wide range of sprayers. From entry-level to professional-grade models, the range is diverse. Its international presence makes accessibility of parts a breeze.

Local Stores VS Online Shopping

With advancements in e-commerce and technology, every buyer has two choices. You can either search for reliable parts locally or online.

Local Stores

If you are concerned about the reliability and compatibility of the product, it’s better to opt for local shops. They allow you to physically check the compatibility and inspect the part. Store representatives are learned and experienced people, they can offer you suggestions and invaluable advice. Most of the local stores have inventories making replacement of common parts feasible and fast.

Online Platforms

E-commerce platforms like Amazon.ca and eBay are recognized worldwide. They offer a broader range and variety of replacement parts that cater to specific models of airless paint sprayers. Detailed product descriptions and customer reviews are given for every product. Home delivery and diversity is what makes online shopping a convenient choice. However, you need to find a trusted brand to get genuine parts to ensure the efficiency of your sprayer.

Customs and Duties

Sometimes, certain parts are not available locally which necessitates its international purchase. While internationally, your options are wide, do consider the long shipping times and possible customs duties. Always consider these two factors when opting for ordering replacement parts from across the border.

Maintenance: Prevention is better than Cure!

While it’s crucial to replace certain parts of your sprayer, it is important to level up your maintenance. It not only reduces the frequency of the replacements but also adds to the longevity of the product. Regular cleaning after every use is of prime importance. Furthermore, proper storage and periodic inspections of your airless sprayer can extend the life of your machine.

Tips for Choosing the Right Replacement Part

Given the myriad of options available on the market, choosing the right one can be daunting. Here are some tips to streamline the process;

  • Understand your sprayer model
  • Original Equipment Manufacturer OEM parts are more compatible
  • Check for warranties on the replacement parts
  • Seek professional and expert opinion
  • Reviews can be a goldmine of information, do read them.
  • Cost is not the sole determining factor.

Conclusion

Airless paint sprayers have become a staple for both DIY and professional projects given their performance. While their efficiency is premium and efficiency unbeatable, they do require regular upkeep. Regular inspection of the parts and their occasional replacement is the key to the superior performance of the sprayer.

Thankfully, there is no dearth of options, when it comes to sourcing high-quality products. You can find elite brands like Titan, Graco, and Wagner all across the world. You can also choose from the tactile experience of shopping locally or enjoy the convenience of the online market!