Titan 920-005 Outlet Filter - Aftermarket | Bedford 14-2266

PriceQuantity

$ 20.16

Part #:

920-005

MPN:

14-2266

Manufacturer:

Bedford Precision Parts

Guaranteed safe & secure checkout

In Stock

Titan 920-005 Outlet Filter - Aftermarket Replacement | Bedford 14-2266

The Bedford 14-2266 is a precision-engineered aftermarket replacement for the Titan 920-005 outlet filter, designed to serve as the final line of defense in the fluid pathway of compatible Titan airless pump systems. This high-pressure stainless steel filter element captures fine particulates, dried coating fragments, and other debris to prevent clogs in spray tips, protect downstream valves, and ensure a consistent, clean material flow for professional application quality, all at a significant cost advantage over the original equipment part.

Premium Quality Fine Mesh Stainless Steel

Why Choose This Outlet Filter

Fine stainless steel mesh provides superior filtration to protect sensitive spray tips and gun internals
Durable construction withstands system pressures up to 3,300 PSI and resists chemical corrosion
Cost-effective, essential maintenance component to reduce downtime and prevent costly repairs
Direct replacement for Titan 920-005, ensuring exact fit and OEM-level filtration performance

Common Applications

Standard replacement part for Titan Impact series pumps (e.g., 440, 640, 840) manufactured after 2015 with fluid block assembly part# 113-XXX
Critical filtration for pumps used with abrasive materials, textured coatings, or in reclaimer systems to prevent tip and valve wear
Mandatory component in pump overhaul kits for serial numbers TIN-XXXXX and above, where the 920-005 filter is specified
Solving persistent flow issues or pulsation caused by contamination downstream of the pump's primary valves

Compatible with Titan pump models where the OEM outlet filter part number is specifically 920-005 (distinct from 920-004).

What It Fits

Titan Pump Models: Titan 440, 540i, 640, 640PC, 840, and 940 series pumps that specify filter part number 920-005 in the outlet manifold or fluid block (often found in pumps with serial numbers post-2015).
Replaces Titan Part: 920-005 (Outlet Filter Element). This is a different part than 920-004; verify the number on your existing filter or in your pump's technical manual.
Specific Use: Filters fluid post-pump and pre-hose, protecting the entire downstream system from internal pump wear debris and contaminants that bypass the inlet filter.
System Location: Installs in the outlet filter housing, which is integral to the pump's outlet manifold or high-pressure fluid block assembly.

If your Titan pump's outlet filter is marked 920-005 or your service manual specifies this exact part number, Bedford 14-2266 is the correct aftermarket replacement. Do not confuse with 920-004.

Technical Specifications

Aftermarket	Bedford 14-2266
OEM	Titan 920-005
Part Type	Outlet Filter Element
Compatibility	Titan Impact Series Pumps (Post-2015)
Quantity	Single Filter
Material	304 Stainless Steel Mesh & Body
Pressure Rating	Up to 3,300 PSI
Brand	Bedford Precision Parts (Aftermarket)

Installation Notes

Fully depressurize the system, disconnect from power, and engage safety lockout before any disassembly.
Locate the outlet filter housing on the pump's fluid block. Remove the retaining plug or cap using the correct wrench size.
Carefully remove the old 920-005 filter, noting its orientation. Clean the housing bore and sealing surfaces thoroughly.
Insert the new Bedford 14-2266 filter in the correct orientation (typically mesh facing inward/upstream). Ensure it seats fully.
Reinstall the plug/cap with a new seal if provided, torque to specification, and conduct a pressure test.

Pro Tip: Replace the outlet filter every 500 gallons of material pumped or during any major pump service. A clogged filter is a common cause of reduced flow and pressure loss mistaken for pump failure.

When to Replace the Outlet Filter

Scheduled preventive maintenance (recommended every 6-12 months for professional use)
Visible contamination on the filter mesh or a measurable drop in system flow rate
After pumping heavily abrasive materials, primers with high solids, or when using a reclaimer system
During the repair of any downstream component (gun, hose, tip) that failed due to contamination

Bedford vs OEM

Feature	Bedford Aftermarket	OEM (Titan)
Fit & Function	Direct replacement for 920-005 filter	Original factory component
Filtration Efficiency	Identical fine mesh for contaminant capture	Original equipment performance
Durability	High-grade stainless steel construction	Factory material specification
Value	Significant cost savings for routine maintenance	Genuine manufacturer part

Frequently Asked Questions

What's the difference between the 920-004 and 920-005 filter?

While both are outlet filters, they are not interchangeable. The 920-005 (Bedford 14-2266) is designed for specific Titan pump models and fluid block configurations, often found in newer or different series than those using the 920-004. Always match the part number exactly.

How do I confirm my pump uses the 920-005 filter?

The safest method is to disassemble the outlet filter housing on your pump and check the number stamped on the existing filter. Alternatively, consult your pump's official service manual or parts list using your model and serial number.

Can a clogged outlet filter damage my pump?

While the pump can operate against the restriction, a severely clogged filter causes excessive strain, reduces efficiency, and can lead to overheating. More critically, it allows contaminants to reach and damage expensive spray tips, guns, and valves downstream.

Is this filter cleanable or disposable?

It is designed as a disposable maintenance item. Although made of stainless steel, attempting to clean it often damages the mesh or leaves embedded particles. For reliable protection, replacement is recommended.

Where does it ship from?

If in stock, orders ship from Bedford Hill, New York for quick delivery to your location.

Titan 920-005 Outlet Filter - Aftermarket | Bedford 14-2266