Shopping cart
Your Cart is empty
Titan 761-136A Upper Packing Assembly - Aftermarket | Bedford 49-2193
PriceQuantity
$ 24.5
Part #:
761-136A
MPN:49-2193
Manufacturer:Bedford Precision Parts
Guaranteed safe & secure checkout
In Stock
Titan 761-136A Upper Packing Assembly - Premium Aftermarket Replacement | Bedford 49-2193
The Bedford 49-2193 is a premium aftermarket replacement for the Titan 761-136A upper packing assembly used in the fluid sections of popular Titan sprayers such as Impact 440, 540, 640 and 690GHD series. This assembly seals the piston rod at the top of the pump, helping maintain prime, pressure and smooth stroking under demanding duty cycles, while matching OEM fit and performance at a more economical service cost.
Premium Quality
Upper Packing Assembly
High-Duty Seal Stack
Why Choose This Upper Packing Assembly
- Direct aftermarket replacement for Titan 761-136A upper packing assembly
- Seals around the piston rod to reduce fluid bypass and loss of pressure
- Supports smooth pump stroke and consistent spray patterns in Titan airless units
- Engineered for contractor-grade use in Titan Impact and Advantage series sprayers
Common Applications
- Upper packing service on Titan Impact 440, 540 and 640 pump assemblies
- Rebuilds of Titan fluid sections specified with upper packing 761-136A
- Maintenance of professional contractor sprayers used with acrylics, latex and enamels
- Preventive rebuilding of pumps in high-use rental and fleet environments
Ideal for Titan piston pumps where the parts breakdown calls out 761-136A as the upper packing assembly.
What It Fits
- Titan Impact 440 sprayers, models Impact 440 805-009, 805-013 using pump kits with 761-136A
- Titan Impact 540 and 640 units with fluid section assemblies listing upper packing 761-136A
- Titan 690GHD and similar piston pumps using rod seal stack 761-136A in the upper housing
- Other Titan airless sprayers where factory documentation specifies OEM upper packing 761-136A
If your Titan pump schematic shows upper packing assembly 761-136A, the Bedford 49-2193 is the correct aftermarket replacement.
Technical Specifications
| Aftermarket | Bedford 49-2193 |
|---|---|
| OEM | Titan 761-136A Upper Packing Assembly |
| Assembly Type | Upper piston rod packing stack for fluid section |
| Compatible Models | Titan Impact 440, 540, 640, 690GHD and other pumps listing 761-136A |
| Sealing Function | Controls fluid bypass at the upper rod, maintains prime and pressure |
| Typical Fluids | Waterborne latex, acrylics, enamels and compatible architectural coatings |
| Quantity | Single upper packing assembly |
| Brand | Bedford Precision Parts (Aftermarket) |
Installation Notes
- Disconnect power, relieve pressure and flush coating from the Titan sprayer before disassembly
- Remove the fluid section from the drive, then disassemble the upper housing per Titan service instructions
- Extract the worn upper packing stack and thoroughly clean the packing bore and piston rod
- Install the Bedford 49-2193 upper packing assembly in the correct order and orientation, lubricating lighty with compatible pump oil
- Reassemble the pump, reinstall on the sprayer, then prime and test under pressure for leaks and smooth operation
Pro Tip: Always inspect the piston rod for scoring or wear when replacing upper packings - rod damage can quickly ruin new seals and reduce pump life.
When to Replace Upper Packings
- Fluid leaks from the top of the pump or around the rod area during operation
- Loss of prime, slow pressure build or excessive stroking to maintain output
- Visible wear particles, pigment or scoring marks on the piston rod near the upper seals
- Routine fluid section rebuild intervals in high-hour contractor or rental service
Bedford vs OEM
| Feature | Bedford Aftermarket | OEM (Titan) |
|---|---|---|
| Fit & Function | Direct replacement for Titan 761-136A upper packing assembly | Original Titan upper packing assembly |
| Sealing Performance | Restores rod sealing, prime retention and outlet pressure stability | Factory-rated sealing performance on specified models |
| Durability | Engineered for repeated rebuild cycles in professional use | Standard OEM durability for Titan pumps |
| Value | Lower-cost alternative while maintaining OEM-style fit | OEM pricing through Titan distribution |
Frequently Asked Questions
The Titan 761-136A upper packing assembly seals around the piston rod at the top of the pump. It prevents coating from bypassing along the rod, helps maintain prime and outlet pressure, and supports smooth, efficient stroking of the fluid section in Titan Impact and similar sprayers.
Bedford 49-2193 is designed as an aftermarket replacement for Titan 761-136A. It is compatible with Titan Impact 440, 540, 640, 690GHD and other models whose parts breakdowns list 761-136A as the upper packing assembly in the fluid section.
For best results, many technicians service both upper and lower packings during a fluid section rebuild. Replacing all wear components at once helps restore full pump performance and can lengthen the interval before the next rebuild is needed.
Signs of worn upper packings include paint or fluid leaking from the top of the pump, loss of prime, reduced pressure, or visible scoring and residue on the piston rod. If you observe any of these symptoms, an upper packing replacement with Bedford 49-2193 is recommended.
Most rebuilds require only standard hand tools to remove the fluid section and access the packing stack. Always follow Titan’s service manual for your specific model and ensure the sprayer is fully depressurized before starting work.
