Shopping cart
Your Cart is empty
Titan 314-180 Ball - Aftermarket | Bedford 9-876
PriceQuantity
$ 28.3
Part #:
314-180
MPN:9-876
Manufacturer:Bedford Precision Parts
Guaranteed safe & secure checkout
In Stock
Titan 314-180 Ball - Premium Aftermarket Replacement | Bedford 9-876
The Bedford 9-876 is a premium aftermarket replacement for the Titan 314-180 check ball used in pump inlet and outlet valve assemblies on select Titan airless spray systems. This precision-ground steel ball provides a smooth, concentric sealing surface for accurate one-way flow control, helping to restore priming, pressure stability and pump efficiency. Engineered to meet OEM dimensional tolerances, it delivers dependable performance for professional maintenance and rebuild operations.
Premium Quality
Steel Check Ball
Wear Resistant
Why Choose This Check Ball
- Direct aftermarket replacement for Titan 314-180 steel check ball
- Precision-ground spherical surface for tight, repeatable sealing on the valve seat
- Helps restore priming, pressure stability and one-way flow through Titan pumps
- Manufactured to OEM tolerances for correct fit in Titan check valve bodies
Common Applications
- Inlet and outlet check valve rebuilds on older Titan airless paint sprayers
- Service of Titan 330, 440 and 660-style pumps using ball 314-180
- Routine valve maintenance on Titan contractor units spraying architectural coatings
- Field repairs on Titan fluid sections requiring OEM ball part number 314-180
Ideal for pump rebuilds where Titan parts lists specify steel ball 314-180 in the check valve assembly.
What It Fits
- Titan 330 airless sprayers using check valve bodies that call out ball 314-180 in the parts breakdown
- Titan 440 and 660-series pumps where the inlet or outlet valve bill of materials specifies 314-180
- Titan pump bodies using valve seat 314-181 and cage 314-182 designed for 314-180 steel ball sealing
- Other Titan pump and valve assemblies where the service manual lists OEM ball part number 314-180
If your Titan pump breakdown specifies ball 314-180 in the check valve assembly, Bedford 9-876 is the correct aftermarket replacement component.
Technical Specifications
| Aftermarket | Bedford 9-876 |
|---|---|
| OEM | Titan 314-180 Steel Ball |
| Component Type | Steel check ball for pump inlet / outlet valves |
| Ball Diameter | Approx. 0.250 in (1/4 in) spherical ball |
| Material | Hardened steel for strength, impact and wear resistance |
| Position | Sealing element inside Titan check valve assemblies using seat 314-181 |
| Quantity | Single ball (one required per valve cavity unless otherwise specified) |
| Brand | Bedford Precision Parts (Aftermarket) |
Installation Notes
- Fully depressurize the Titan sprayer, lock out power and disconnect the gun before service
- Remove the inlet or outlet valve body following Titan service procedures for your pump model
- Clean the internal valve cavity, seat 314-181 and cage 314-182, removing debris and worn parts
- Install the Bedford 9-876 steel ball on a clean, undamaged seat to ensure full contact
- Reassemble the valve, prime the pump and verify proper check operation and stable system pressure
Pro Tip: Replace the matching seat and cage whenever a check ball shows flat spots or pitting to restore full sealing performance and extend service intervals.
When to Replace Check Balls
- Loss of prime or repeated need to re-prime the Titan pump
- Pressure surging, unstable spray pattern or reduced output at the gun
- Visible damage, flat spots, corrosion or pitting on the ball surface
- Backflow through the check valve or inability to maintain pressure at closed gun
Bedford vs OEM
| Feature | Bedford Aftermarket | OEM (Titan) |
|---|---|---|
| Fit & Function | Direct replacement for Titan 314-180 steel check ball | Original factory steel check ball |
| Sealing Performance | Precision-ground surface for reliable seating on OEM valve seats | Meets Titan factory sealing specification |
| Durability | Hardened steel for long life in architectural and maintenance coatings | Standard OEM durability characteristics |
| Value | Single replacement ball reduces cost on routine valve rebuilds | OEM pricing with factory packaging |
Frequently Asked Questions
The Titan 314-180 steel ball is the moving sealing element inside selected inlet and outlet check valves. It lifts off the seat during suction or pressure stroke and returns to seal, providing one-way flow so the pump can prime, hold pressure and prevent backflow.
Bedford 9-876 is designed as an aftermarket replacement for Titan 314-180 and is compatible with Titan airless pump and valve assemblies where the parts breakdown specifically lists ball 314-180 in the check valve bill of materials.
You should always inspect the seat when replacing a check ball. If the seat shows grooves, pitting or uneven wear, replace the seat and ball together to restore full sealing performance and avoid early recurrence of priming or pressure issues.
In many Titan pump designs, the same 314-180 steel ball is used in both inlet and outlet check valves. Always confirm your parts breakdown to ensure 314-180 is specified for the exact valve location before installing Bedford 9-876.
If in stock, Bedford 9-876 typically ships from Bedford Hills, New York, providing quick delivery to most regions when ordered through participating distributors and service centers.
