Shopping cart
Your Cart is empty
Titan 12386 Ball - Aftermarket | Bedford 9-1862
PriceQuantity
$ 28.77
Part #:
12386
MPN:9-1862
Manufacturer:Bedford Precision Parts
Guaranteed safe & secure checkout
In Stock
Titan 12386 Ball - Premium Aftermarket Replacement | Bedford 9-1862
The Bedford 9-1862 offers a high-quality aftermarket replacement for the Titan 12386 steel ball used in pump check valve assemblies on Titan airless sprayers. This precision-ground ball provides a smooth sealing surface against the matching seat, helping restore reliable priming, stable operating pressure and efficient one-way flow control through the pump. Designed to match OEM tolerances, it delivers OEM-level performance at a lower cost for professional service and maintenance operations.
Premium Quality
Steel Check Ball
Wear Resistant
Why Choose This Check Ball
- Direct aftermarket replacement for Titan 12386 steel check ball
- Precision-ground spherical surface for tight, repeatable sealing against the valve seat
- Helps restore priming, pressure stability and one-way flow control in Titan pumps
- Manufactured to OEM dimensional tolerances for correct fit in Titan check valve bodies
Common Applications
- Inlet and outlet check valve rebuilds on Titan airless paint sprayers
- Service and maintenance of Titan 440i and 640i pump assemblies using ball 12386
- Routine valve service on Titan contractor pumps handling architectural coatings
- Field repairs on Titan fluid sections requiring OEM ball part number 12386
Ideal for pump rebuilds where Titan parts lists specify steel ball 12386 in the check valve assembly.
What It Fits
- Titan 440i airless sprayers, models 440i 800-300 and 440i 800-310 using ball 12386 in inlet valve 700-125
- Titan 640i units, models 640i 800-400 and 640i 800-410 with outlet valve assemblies specifying ball 12386
- Titan pump bodies using valve seat 700-127 and cage 700-126 designed for 12386 steel ball sealing
- Other Titan pump and valve assemblies where the service manual lists OEM ball part number 12386
If your Titan breakdown specifies ball 12386 in the check valve assembly, Bedford 9-1862 is the correct aftermarket replacement component.
Technical Specifications
| Aftermarket | Bedford 9-1862 |
|---|---|
| OEM | Titan 12386 Steel Ball |
| Component Type | Steel check ball for pump inlet / outlet valves |
| Ball Diameter | Approx. 0.250 in (1/4 in) spherical ball |
| Material | Hardened steel for strength and impact resistance |
| Position | Sealing element inside Titan check valve assemblies using seat 700-127 |
| Quantity | Single ball (one required per valve cavity unless otherwise specified) |
| Brand | Bedford Precision Parts (Aftermarket) |
Installation Notes
- Fully depressurize the Titan sprayer, lock out power and disconnect the gun before service
- Remove the inlet or outlet valve body according to Titan service procedures for your model
- Clean the internal valve cavity, seat 700-127 and cage 700-126, removing debris and worn components
- Install the Bedford 9-1862 steel ball on a clean, undamaged seat to ensure full contact
- Reassemble the valve, prime the pump and verify proper check valve operation and pressure stability
Pro Tip: Inspect and replace the matching valve seat and cage whenever a check ball shows flat spots, pitting or wear to maintain long-term sealing performance.
When to Replace Check Balls
- Persistent loss of prime or repeated need to re-prime the Titan pump
- Pressure surging, unstable spray pattern or drop in output at the gun
- Visible flat spots, corrosion or pitting on the existing ball surface
- Backflow through the check valve or inability to hold pressure at closed gun
Bedford vs OEM
| Feature | Bedford Aftermarket | OEM (Titan) |
|---|---|---|
| Fit & Function | Direct replacement for Titan 12386 steel check ball | Original factory steel check ball |
| Sealing Performance | Precision-ground surface for reliable seating on OEM valve seats | Meets Titan factory sealing specification |
| Durability | Hardened steel for long life in typical architectural coatings | Standard OEM durability characteristics |
| Value | Single replacement ball reduces cost on routine valve rebuilds | OEM pricing with factory packaging |
Frequently Asked Questions
The Titan 12386 steel ball is the moving sealing element inside selected inlet and outlet check valves. It lifts off the seat during suction or pressure stroke and returns to seal against the seat, providing one-way flow so your pump can prime, hold pressure and prevent backflow.
Yes. Bedford 9-1862 is designed as an aftermarket replacement for Titan 12386 and is commonly used in check valve assemblies on Titan 440i and 640i airless sprayers where the parts breakdown specifies ball 12386 in the valve body.
It is recommended to inspect the seat closely whenever a ball is replaced. If the seat shows grooves, pitting or uneven wear, replace the seat and ball together to restore full sealing performance and avoid premature issues.
In many Titan pump designs, the same 12386 steel ball is used in both inlet and outlet check valves. Always confirm your parts breakdown to ensure 12386 is specified for the exact valve location before installing Bedford 9-1862.
If in stock, Bedford 9-1862 typically ships from Bedford Hills, New York, providing quick delivery to most regions when ordered through participating distributors and service centers.
