Is Bedford 33-10515 a direct replacement for Graco LTX515?

Yes — it matches RAC X Large Barrel dimensions and spray characteristics used with Graco airless sprayers.

Which coatings does the LTX515 handle best?

Medium-to-heavy architectural coatings such as interior/exterior latex, acrylics, and primers.

How can I confirm fit?

Verify that your gun or guard is a Graco RAC X (LTX) Large Barrel style. If so, this Aftermarket tip will fit.

When should I replace the tip?

Replace when the fan narrows, output drops at normal pressure, or tails appear on the edges after routine cleaning.

Where does it ship from?

If in stock, it ships from Bedford Precision Parts in Bedford Hill, New York.

Graco LTX515 Standard Large Barrel Tip 515 Aftermarket | Bedford 33-10515

PriceQuantity

$ 27.99

Part #:

LTX515

MPN:

33-10515

Manufacturer:

Bedford Precision Parts

Guaranteed safe & secure checkout

In Stock

Precision large-barrel contractor spray tip delivering a 10″ fan, 0.015″ orifice, and consistent OEM-grade finishes for medium-to-heavy coatings

The Graco LTX515 Standard Large Barrel Tip 515 Aftermarket — replacement model Bedford 33-10515 — is built for professional Graco airless paint sprayers using RAC X large-barrel guards. With a balanced 10″ spray fan and 0.015″ orifice, this LTX515 tip maintains clean edges and uniform film build on walls, trim, and exteriors. A tungsten-carbide insert preserves the Standard pattern geometry for long service life, making this Aftermarket option a reliable match to the original Graco LTX515 Large Barrel Tip 515.

Aftermarket 0.015″ Orifice Large Barrel

Why Choose This Contractor Tip

Direct Aftermarket equivalent for Graco LTX515 (RAC X Large Barrel)
0.015″ orifice with a 10″ fan for latex, primers, and acrylic coatings
Carbide insert resists wear and preserves the Standard spray pattern
Consistent atomization with controlled edges and reduced overspray
Value-focused upgrade path compared with OEM individual tips

Typical Compatibility

Fits Graco guns/guards and sprayers that accept LTX Large Barrel tips:

Graco Contractor & FTx guns with RAC X tip guards
Ultra Max II 490/695/795/1095/1595 platforms
GMax II 5900/7900 and Mark Series sprayers
Magnum ProX17/ProX19 using RAC X guards

Confirm your tip guard is RAC X (Large Barrel) for proper fitment.

What It Fits

Bedford 33-10515 replaces the Graco LTX515 Standard Large Barrel Tip 515 and is widely used across the following setups:

RAC X (LTX) Large Barrel tip guards
Graco Contractor and FTx spray guns
Ultra Max II 490/495/595/695/795/1095 families
GMax II 5900/7900 and Mark IV/Mark V units
Magnum ProX17/ProX19 with RAC X guard
Other RAC X Large Barrel compatible sprayers

Technical Specifications

Tight manufacturing tolerances help maintain the LTX515 fan geometry, Standard pattern control, and Large Barrel stability across varied coating viscosities.

Specification	Detail
Aftermarket	Bedford 33-10515
OEM Reference	Graco LTX515 (RAC X Large Barrel)
Fits	Graco guns/guards & sprayers using LTX Large Barrel tips
Type	Standard Contractor spray tip
Orifice Size	0.015 inch
Fan Width	10 inches at ~12″ distance
Material	Tungsten-carbide insert; nickel-plated body
Function	Atomizes coatings for uniform film and edge definition
Pressure Guidance	Operate within the sprayer’s rated maximum PSI
Brand	Bedford Precision Parts (Aftermarket)

Installation Notes

Relieve pressure and lock the trigger before swapping tips
Seat the LTX515 properly in the RAC X Large Barrel guard
Align for horizontal or vertical orientation as required
Start at low pressure, test the fan, then fine-tune output
Clean immediately after use to prevent buildup and wear

Flip to the clean position to clear a clog mid-job, then rotate back to spray.

When to Rebuild / Replace

Fan narrows or edges begin to tail despite normal pressure
Output drops or multiple passes are needed for coverage
Overspray increases and finish quality declines
Orifice shows rounding or visible wear

Bedford 33-10515 vs Graco LTX515 OEM Comparison

Compare availability and value for crews that rely on LTX Large Barrel coverage:

Feature	Bedford Aftermarket	OEM (Graco)
Part	33-10515	LTX515
Orifice / Fan	0.015″ / 10″	0.015″ / 10″
Material	Tungsten-carbide insert; nickel-plated body	Tungsten-carbide insert; nickel-plated body
Durability	Contractor-rated wear life	OEM-rated wear life
Availability	If in stock, ships from Bedford Precision Parts in Bedford Hill, New York	Dependent on OEM supply
Value	OEM-level results at a lower cost	Premium OEM pricing

Frequently Asked Questions

Answers to common questions about the LTX515 Standard Large Barrel Tip 515 Aftermarket replacement.

Order Bedford 33-10515 today to keep your Graco LTX515 Large Barrel setup delivering a clean Standard spray pattern and consistent coverage.

Graco LTX515 Standard Large Barrel Tip 515 Aftermarket | Bedford 33-10515