Shopping cart
Your Cart is empty
Graco 286633 Reversible Tip - Aftermarket | Bedford 33-7633
PriceQuantity
$ 19.99
Part #:
286633
MPN:33-7633
Manufacturer:Bedford Precision Parts
Guaranteed safe & secure checkout
In Stock
Graco 286633 Reversible Tip (RAC V 633) - Aftermarket Replacement | Bedford 33-7633
Professional RAC V reversible spray tip sized 633 for broad coverage and heavy-body coatings. It replaces OEM Graco 286633 and is supplied as Bedford 33-7633, delivering consistent fan pattern, quick flip-to-clear purging, and long wear.
Aftermarket
Precision-Machined
Industrial Duty
Why Choose This Reversible Tip
- RAC V 633: ~12″ fan at 12″; 0.033″ orifice for primers, elastomerics, and high-build paints.
- Flip-to-clear design purges clogs in seconds-no tools, less downtime.
- Tungsten-carbide insert for uniform atomization and extended service life.
Color cue: RAC V guards are typically orange; size is laser-marked on the tip shoulder.
Typical Compatibility
- Interior/exterior wall paints, block fillers, roof & tank coatings (confirm sprayer output).
- Large flat surfaces: walls, siding, decks, structural steel, tanks.
What This Product Fits
- Graco RAC V Hand-Tite tip guard (e.g., 243161/246215) required for proper seating.
- Graco spray guns using RAC V: Contractor / Contractor PC, FTx / FTx II, Silver Plus, SG2, SG3, Flex-style pro guns.
- Airless sprayers that accept RAC V: Classic 190/290/390, Ultra/Ultimate/Ultra Max (select), 395–595 Pro, 695–1095, Mark IV/V/VII, GMax & DutyMax (verify flow/pressure).
- Most 7/8″-thread guards on compatible pro airless systems using the RAC V interface.
Verify your guard type before ordering RAC V tips do not fit RAC X (blue) guards.
Technical Specifications
| Aftermarket # | Bedford 33-7633 |
|---|---|
| OEM # | Graco 286633 (RAC V 633) |
| Fits | RAC V Hand-Tite guard on compatible Graco guns/sprayers |
| Type | Reversible SwitchTip (flip-to-clear) |
| Material | Stainless stem with tungsten-carbide orifice insert |
| Function | ~12″ fan; 0.033″ orifice for high-build coverage and fast unclogging |
| Pressure | Use within gun/sprayer working pressure and coating specs |
| Brand | Bedford Precision Parts (Aftermarket Replacement) |
Installation Notes
- Lock trigger and relieve pressure; confirm your guard is RAC V.
- Insert the 633 tip with gasket; arrow forward for spray.
- Snug the guard hand-tight; do not over-torque.
- Test at low pressure; increase until edges are sharp without tails.
- To clear a clog, rotate to reverse, trigger briefly, then return to spray.
Real installation tip: If edges “fuzz,” raise pressure in small steps or use a coarser pump filter for heavy coatings.
When to Rebuild / Replace
- Increasing pressure needed to maintain pattern width
- Persistent tailing after pressure optimization
- Narrowing fan versus new-tip baseline
- Visible wear or edge chipping of the insert
Bedford vs OEM Comparison
| Feature | Bedford Aftermarket (33-7633) | OEM (Graco) |
|---|---|---|
| Fit & Interface | RAC V guard, 7/8″ thread compatibility | RAC V guard, 7/8″ thread compatibility |
| Size & Pattern | 633 (~12″ fan, 0.033″ orifice) | 633 (~12″ fan, 0.033″ orifice) |
| Performance | Reliable atomization; strong value for maintenance | OEM performance; typically higher cost |
| Availability | If in stock, ships from Bedford Precision Parts in Bedford Hill, New York. | Ships via Graco distribution |
| Color Cues | Green note: value | Blue note: OEM |
FAQ
Yes. This aftermarket part replaces the reversible tip stamped “633” used in RAC V guards.
A Graco RAC V Hand-Tite guard (orange). RAC V tips do not fit RAC X (blue) guards.
High-build paints/primers, elastomerics, block fillers, and some epoxies—ensure your sprayer output matches requirements.
Rotate the tip to reverse, pull the trigger to purge, then rotate back to spray.
If in stock, orders ship from Bedford Hill, NY via Bedford Precision Parts or authorized distributors.
