Graco 286519 Reversible Tip - Aftermarket Replacement | Bedford 33-7519-10

Achieve smooth walls and trim with this aftermarket SwitchTip engineered for productivity and finish. It’s a direct alternative to OEM 286519 and seats in standard RAC 5 guards. Aftermarket reference: 33-7519-10.

Aftermarket Precision-Machined Industrial Duty

Why Choose This Reversible Tip

  • “519” code yields ~10″ fan with a 0.019″ orifice - great for interior latex and primers.
  • Reverse-to-clean action clears most clogs instantly so you keep moving.
  • Tungsten-carbide insert maintains pattern quality across long spray days.

Typical Compatibility

  • RAC 5 (RAC V) Orange Hand-Tight Guard (e.g., 243161).
  • Contractor PC / FTx / Silver series guns with RAC 5 guards.
  • Electric & gas airless rigs rated for 0.019″ tips -verify your model’s max tip size.

Confirm your sprayer’s maximum tip size and working pressure before use.

What This Tip Fits

  • RAC 5 (RAC V) tip guards/holders on compatible Graco spray guns and sprayers.
  • Common rigs accepting RAC 5: Classic 390/395, Ultra Max II 490–1095, Pro/ProContractor variants, GMax 3400–7900, GH 200/300/733 (consult your manual).
  • Coatings: interior/exterior acrylic & latex paints, primers, and light elastomerics suited to a ~10″ fan & 0.019″ orifice.

Technical Specifications

Aftermarket Bedford 33-7519-10 (10-Pack)
OEM 286519
FitsRAC 5 (RAC V) guard/holder (e.g., Orange Hand-Tight Guard 243161)
TypeReversible airless spray tip (519)
MaterialTungsten-carbide orifice insert; steel stem; polymer handle
FunctionApprox. 10″ fan; 0.019″ orifice; 180° rotation to clear clogs
PressureUse within the sprayer/gun’s rated working pressure
BrandBedford Precision Parts (Aftermarket)

Tip code guide: first digit × 2 ≈ fan width (inches @ ~12″); last two digits = orifice (thousandths of an inch).

Installation Notes

  1. Relieve system pressure and lock the gun trigger.
  2. Insert the 519 tip into the RAC 5 guard with the arrow pointing forward.
  3. Hand-tighten the guard; ensure the tip seal is seated correctly.
  4. Test at low pressure; tune for an even, tail-free pattern.
  5. To purge a clog, rotate 180°, trigger briefly, then rotate back to spray.

Pro tip: Match gun filter mesh to coating and strain materials to extend tip life.

When to Rebuild / Replace

  • Persistent tails or uneven fan despite pressure adjustments.
  • Coverage requires notably higher pressure than normal.
  • Fan width no longer approximates ~10″ for a 519 tip.
  • Visible wear, chipping, or distortion at the carbide orifice.

Bedford vs OEM Comparison

FeatureBedford Aftermarket (33-7519-10)OEM (Graco)
Fit & InterfaceMatches RAC 5 (RAC V) guard interfaceFactory RAC 5 SwitchTip interface
Performance~10″ fan; 0.019″ orifice for balanced speed/finishFactory-spec fan/orifice and finish
AvailabilityIf in stock, ships from Bedford Precision Parts in Bedford Hill, New York.Ships via Graco distribution
Color CuesGreen: valueBlue: OEM

FAQs

Yes—this 10-pack is an aftermarket alternative matching RAC 5 fit and reversible operation.
RAC 5 (RAC V) guards such as the Orange Hand-Tight Guard (e.g., 243161). Verify your gun/guard model.
Most interior/exterior acrylic and latex paints, primers, and similar materials. Always consult the coating TDS and your sprayer’s max tip rating.
Rotate to the clean position, trigger briefly to purge, then rotate back to spray.
If in stock, orders ship from Bedford Precision Parts in Bedford Hills, NY via your chosen method.