Graco 286411 Reverse Tip 3-Pack - Aftermarket | Bedford 33-7411-3

Keep finishes crisp and downtime low with this contractor-ready three-pack of size 411 reversible airless tips. The aftermarket Bedford 33-7411-3 crosses directly to Graco 286411 and installs in RAC 5 HandTite guards used on popular Graco spray guns and portable sprayers. Each 411 tip features a 0.011″ orifice that lays down an approximately 8–10″ fan at standard working distance - ideal for light architectural coatings where clean edges and uniform build are important. When debris appears, rotate to CLEAN, trigger briefly, and return to SPRAY to restore pattern quickly without tools.

Aftermarket Precision-Machined Industrial Duty

Why Choose This Reverse Tip

  • 411 size provides an ~8–10″ fan with a 0.011″ orifice for controlled coverage.
  • Flip-to-clean action clears minor clogs fast - no disassembly.
  • Aftermarket value with repeatable pattern geometry for dependable results.

Service cue: Replace the guard seal whenever you notice weeping or edge haze after tip swaps.

Typical Compatibility

  • RAC 5 HandTite tip guards (e.g., 243161 7/8″ thread; 243263 11/16″).
  • Graco SG2 / SG3 and Contractor / FTX spray guns supplied with RAC 5 guards.
  • Ultra / Ultra Max sprayers configured for RAC 5 SwitchTips.
  • Systems operating up to 4,050 psi within RAC 5 component limits.

Confirm your gun and guard are RAC 5 before ordering.

What This Product Fits

  • RAC 5 HandTite guards on compatible Graco guns (Contractor, FTX, SG2, SG3).
  • Graco Ultra / Ultra Max portable sprayers using RAC 5 guards.
  • RAC 5 setups rated to 4,050 psi maximum working pressure.
  • Applications calling for a reversible 0.011″ tip with ~8–10″ fan width.

Cross-reference verified for the 411 SwitchTip. Check your sprayer’s IPL for guard thread size and confirmation.

Technical Specifications

Aftermarket #Bedford 33-7411-3 (3-pack)
OEM #Graco 286411 (RAC 5 SwitchTip, size 411)
FitsRAC 5 HandTite guards on SG2/SG3, Contractor/FTX guns; Ultra / Ultra Max sprayers
TypeReversible airless spray tip (SwitchTip)
MaterialHardened orifice with precision-machined tip barrel
Function~8–10″ fan; 0.011″ orifice; reverse to purge debris and restore pattern
PressureUp to 4,050 psi (per RAC 5 guard/tip rating)
BrandBedford Precision Parts (Aftermarket)

Tip code basics: first digit ×2 ≈ fan width at 12″; last two digits = orifice in thousandths (11 → 0.011″).

Installation Notes

  1. Relieve pressure; lock the gun trigger and power down the sprayer.
  2. Seat a fresh tip seal in the guard; insert the tip with “SPRAY” facing out.
  3. Install the retainer; hand-tighten, then snug per the gun manual.
  4. Test at low pressure; increase only until the fan is crisp and even.
  5. To clear a clog, rotate to “CLEAN,” trigger briefly, then return to “SPRAY.”

Real Installation Tip: Keep spare seals and a clean tip ready - swap at the first sign of tails rather than over-pressurizing.

When to Rebuild / Replace

  • Persistent tails or uneven edges after correct pressure and filtration.
  • Fan width no longer matches the 411 code at working distance.
  • Frequent clogs despite strained coatings and clean filters.
  • Visible wear on the tip face or a notable drop in output.

Bedford vs OEM Comparison

FeatureBedford Aftermarket (33-7411-3)OEM (Graco)
Size & Geometry411 (0.011″ orifice), reversible411 (0.011″ orifice), reversible
Fan PatternApprox. 8–10″ at standard distanceApprox. 8–10″ at standard distance
Max Working Pressure4,050 psi (RAC 5 spec)4,050 psi (RAC 5 spec)
AvailabilityIf in stock, ships from Bedford Precision Parts in Bedford Hill, New York.Ships via Graco distribution

FAQs

Yes. It’s an aftermarket cross for the 411 RAC 5 SwitchTip and uses the same HandTite guard interface.
RAC 5 HandTite guards such as 243161 (7/8″) and 243263 (11/16″); for use with RAC 5 SwitchTips.
“4” ≈ 8–10″ fan at 12″; “11” indicates a 0.011″ orifice suited to light architectural coatings.
RAC 5 tips and guards list a 4,050 psi maximum working pressure; always follow your sprayer and gun limits.
Graco SG2/SG3 and Contractor/FTX guns, plus Ultra / Ultra Max sprayers equipped with RAC 5 guards.