Shopping cart
Your Cart is empty
Graco 217476 Intake Valve Aftermarket I Bedford 58-2009
PriceQuantity
217476
MPN:58-2009
Manufacturer:Bedford Precision Parts
Guaranteed safe & secure checkout
Graco 217476 Intake Valve Aftermarket | Bedford 58-2009
The Graco 217476 Intake Valve - aftermarket model Bedford 58-2009 - is a high-quality check valve assembly designed for large-capacity Graco hydraulic sprayers. It regulates fluid entry into the pump during the suction stroke, providing steady priming and consistent pressure. Built from hardened steel with a precision-lapped seat, this aftermarket intake valve restores OEM performance for contractors operating GH-533, 63:1 King, and 30:1 Bull models used in high-solids coating and heavy industrial applications.
Why Choose the Graco 217476 Intake Valve
The Bedford 58-2009 intake valve is engineered to maintain suction integrity and reliable performance in heavy-duty hydraulic systems.
- Direct aftermarket replacement for OEM 217476.
- Precision-machined seat ensures positive sealing under high pressure.
- Hardened steel valve components resist corrosion and abrasion.
- Maintains smooth spray flow and consistent coating thickness.
Typical Compatibility
This aftermarket intake valve is compatible with the following Graco hydraulic sprayers:
- Graco 30:1 Bull
- Graco GH-533
- Graco 63:1 King
- Graco GH-933 Series
- Other models referencing OEM 217476
Verify with your sprayer’s parts manual to confirm compatibility. If it lists 217476, this Bedford 58-2009 valve fits perfectly.
What It Fits
The Bedford 58-2009 aftermarket intake valve directly replaces Graco 217476 and fits a wide range of heavy-duty sprayers and pump lowers:
- Graco GH-533 hydraulic airless sprayers
- Graco 63:1 King airless sprayers for protective coatings
- Graco 30:1 Bull hydraulic sprayers
- Graco GH-933 industrial high-flow systems
- Bedford aftermarket rebuild kits referencing OEM intake valve 217476
Used across Graco’s King, Bull, and GH-Series sprayers, this intake valve supports high-output pumps handling epoxies, fireproofing, and other high-viscosity coatings.
Technical Specifications
The Graco 217476 Intake Valve (Aftermarket Bedford 58-2009) matches OEM precision and strength for consistent suction and pressure retention under heavy loads.
| Specification | Detail |
|---|---|
| Aftermarket Part | Bedford 58-2009 |
| OEM Reference | Graco 217476 |
| Fits | Graco 30:1 Bull, GH-533, GH-933, and 63:1 King sprayers |
| Component Type | Intake valve (check valve assembly) |
| Material | Hardened steel valve components and lapped seat |
| Function | Allows one-way fluid entry for suction and pressure stability |
| Operating Pressure | Up to 7200 PSI (50 MPa) |
| Brand | Bedford Precision Parts (Aftermarket) |
Installation Notes
Proper installation of the Graco 217476 Intake Valve (Bedford 58-2009) ensures dependable suction and smooth performance:
- Depressurize the sprayer and remove power or air supply.
- Disassemble the lower pump and clean all fluid passages.
- Remove the old intake valve and inspect the valve seat cavity.
- Install the new Bedford valve, ensuring correct orientation and secure seating.
- Reassemble the lower, prime at low pressure, and test for suction and pressure consistency.
Pro Tip: Replace piston packings and throat seals when installing a new intake valve for optimal sealing and pressure recovery.
When to Rebuild or Replace
- Loss of prime or cavitation during operation
- Noticeable pulsation or pressure drop at steady flow
- Fluid bypass or backflow through the intake chamber
- Metal wear or scoring on valve seat surface
Bedford 58-2009 vs Graco 217476 OEM Comparison
The Bedford 58-2009 offers OEM-level reliability and fit for all systems using the Graco 217476 Intake Valve, with faster availability and a lower cost.
| Feature | Bedford Aftermarket | Graco OEM |
|---|---|---|
| Part Number | 58-2009 | 217476 |
| Material | Hardened steel with precision-lapped seat | Factory-hardened steel components |
| Durability | Built for industrial and protective coating use | Factory-rated durability |
| Availability | If in stock, ships from Bedford Precision Parts in Bedford Hill, New York | Typically OEM distribution |
| Value | Same performance at a lower aftermarket price | Higher OEM cost |
Frequently Asked Questions
Common questions about the Graco 217476 Intake Valve (Aftermarket Bedford 58-2009):