Graco 214697 Airless Hose - Aftermarket Replacement | Bedford 13-797

Keep flow steady and gun control responsive with a 50 ft x 3/16 in hose engineered for pro sprayers. This aftermarket assembly mirrors the performance profile of Graco 214697 (BlueMax II 3/16" × 50') and is referenced by Bedford as 13-797, giving you a durable, flexible line for coatings work up to the rated working pressure.

Aftermarket Precision-Machined Industrial Duty

Why Choose This Airless Hose Assembly

  • 50' reach with 3/16" I.D. for nimble handling and reduced coil memory.
  • Nylon construction with conductive core for safe, reliable operation.
  • Rated to typical contractor pressures for architectural coatings work.

Service cue: Check whip and main line lengths to balance pressure drop and maneuverability.

Specs confirmed against Graco BlueMax II 214697 and third-party listings.

Typical Compatibility

  • Graco airless sprayers that accept 3/16" I.D., 50' hoses and are rated ≤ 3300 psi working pressure.
  • Replacement for Binks systems calling out 71-8089 and select DeVilbiss listings per cross-reference.
  • Use as primary line or paired with a larger main hose plus a short 3/16" whip for fine control.

Always verify your sprayer’s manual/parts list before ordering.

What This Product Fits

  • Graco contractor and Pro-series airless sprayers requiring a 3/16" I.D. × 50' hose, 3300 psi max (e.g., BlueMax II hose specification).
  • Binks sprayers that reference hose part 71-8089 (cross-ref to this assembly).
  • DeVilbiss listings noted in Bedford’s cross-reference for this SKU.

If your sprayer ships with 1/4" hose, confirm tip size and pressure drop needs before switching to 3/16".

Technical Specifications

Aftermarket Bedford 13-797
OEM 214697 (BlueMax II 3/16" × 50')
FitsGraco airless sprayers accepting 3/16" I.D., 50' hose; Binks 71-8089; select DeVilbiss listings.
TypeAirless Hose Assembly (coupled hose)
MaterialNylon hose with conductive core (BlueMax II equivalent spec).
FunctionDelivers coating from pump to gun with flexibility and reduced coil memory.
PressureMaximum working pressure: 3300 psi (≈22.7 MPa).
Operating TempUp to 180 °F per OEM coupled-hose listing.
EndsJIC-style coupled hose ends.
BrandBedford Precision Parts (Aftermarket)

Pressure/temperature ratings are limited by the lowest-rated component in your system. Always confirm sprayer spec.

Installation Notes

  1. Depressurize sprayer; engage trigger lock and unplug power source.
  2. Remove old hose; inspect swivel seats and adapters for wear.
  3. Attach new hose using compatible JIC fittings; avoid over-torque.
  4. Prime with solvent or water-borne cleaner per coating; check for leaks.
  5. Spray a test panel; verify pattern and pressure at the gun.

Tip: Use a short 3/16" whip at the gun for fine control on interiors or trim.

When to Rebuild / Replace

  • Blistering, cuts, kinks, or exposed braid on the hose jacket.
  • Frequent pressure drops or surging under normal tip sizes.
  • Grounding/continuity check fails on conductive core hoses.
  • Fittings leak despite correct seating and torque.

Bedford vs OEM Comparison

FeatureBedford Aftermarket (13-797)OEM (Graco)
Fit & Interface3/16" × 50' coupled hose for sprayers calling out this size/ratingBlueMax II 3/16" × 50' coupled hose
MaterialsNylon assembly built for architectural coatings serviceNylon with conductive core (BlueMax II)
Working PressureMeets applications up to 3300 psi when used within sprayer ratingFactory-rated 3300 psi working pressure
AvailabilityIf in stock, ships from Bedford Precision Parts in Bedford Hill, New York.Ships via Graco distribution
ValueCost-effective service solutionOEM program

OEM reference and pressure rating per BlueMax II 214697 specification.

FAQs

Yes. Bedford 13-797 is an aftermarket alternative for the 3/16" × 50' hose referenced as Graco 214697. Confirm your hose size and sprayer rating before purchase.
Airless sprayers that specify a 3/16" I.D., 50' coupled hose and ≤ 3300 psi working pressure; also replaces Binks 71-8089 and certain DeVilbiss listings.
3300 psi maximum working pressure (approx. 22.7 MPa) per OEM spec for the equivalent BlueMax II hose. :contentReference[oaicite:18]{index=18}
Nylon with a conductive core design in the OEM reference; aftermarket construction is built to service demands for coatings. :contentReference[oaicite:19]{index=19}
If available, orders ship from Bedford Precision Parts in Bedford Hill, NY using your chosen carrier/service. Lead times may vary by stock status. :contentReference[oaicite:20]{index=20}