Graco 207949 Repair Kit - Aftermarket Replacement | Bedford 20-1081

This aftermarket rebuild set restores sealing and pumping efficiency on Graco 10:1 President air-powered pumps. Engineered with Viton elastomers and stainless-steel wear parts, it matches the OEM geometry of 207949 and is referenced by Bedford as 20-1081 for reliable field service.

Aftermarket Precision-Machined Industrial Duty

Why Choose This Repair Kit

  • Spec’d for 10:1 President pumps - restore prime, pressure stability, and transfer rate.
  • Viton seal chemistry supports common solvents and coatings used in pro shops.
  • Stainless-steel check/wear components resist corrosion in demanding environments.

Color cue: Use with OEM air motor/pump hardware; observe Graco torque values and orientation marks during assembly.

Typical Compatibility

  • Graco 10:1 President air-powered transfer/supply pumps.
  • Shop and line-feed systems requiring steady low-to-medium volume material transfer.
  • Use with compatible suction, riser, and outlet assemblies as specified in your pump manual.

Verify your exact pump model and bill of materials before ordering.

What This Product Fits

  • Graco 10:1 President pump models: 205-626, 205-627, 205-628, 205-629 (and related kits documented in the 10:1 President quick reference).
  • Service replacement for OEM kit 207949 (Bedford aftermarket 20-1081.

Cross-references are provided for convenience; always match by pump model and serial/series.

Technical Specifications

Aftermarket Bedford 20-1081
OEM 207949
FitsGraco 10:1 President pumps (e.g., 205-626/627/628/629)
TypeSeal & wear parts rebuild kit (transfer pump)
MaterialViton elastomers; stainless-steel wear/check components
FunctionRestore sealing, check action, and pumping efficiency
PressureUse within the rated working pressure of 10:1 President systems
BrandBedford Precision Parts (Aftermarket)

Follow Graco service manual instructions for orientation, lubrication, and torque.

Installation Notes

  1. Depressurize system; lockout/tagout air supply.
  2. Remove pump from system and disassemble per model 205-xxx manual.
  3. Clean seats/bores; inspect for scratches or pitting before reassembly.
  4. Install new seals in the original orientation; lightly lubricate as specified.
  5. Reassemble, leak-test at low pressure, then ramp to operating pressure.

Pro tip: Replace suction screens and check balls together to maximize rebuild life.

When to Rebuild / Replace

  • Loss of prime or slow material feed under normal air pressure.
  • Visible material bypass at packings or persistent air-in-material symptoms.
  • Erratic outlet pressure or flutter due to worn checks.
  • Chemical swelling or hardening of legacy seals.

Bedford vs OEM Comparison

FeatureBedford Aftermarket (20-1081)OEM (Graco)
Fit & InterfaceMatches 10:1 President kit dimensionsFactory kit geometry
MaterialsViton seals; stainless-steel wear itemsOEM-specified materials
AvailabilityIf in stock, ships from Bedford Precision Parts in Bedford Hill, New York.Ships via Graco distribution
ValueLower cost of ownershipOEM brand program

FAQs

Yes. This Bedford aftermarket kit (20-1081) is referenced for Graco 10:1 President pumps with Viton/SS construction and matches OEM service dimensions.
Typical 10:1 President pumps including 205-626, 205-627, 205-628, and 205-629. Always confirm against your pump’s parts list.
Viton elastomers with stainless-steel wear and check components for chemical resistance and durability.
Clean all seating surfaces, lube seals per manual, and test at low pressure before returning to service to verify check seating.
If in stock, orders ship from Bedford Precision Parts, Bedford Hill, NY through your chosen carrier/service.