Shopping cart
Your Cart is empty
Graco 205143 Fluid Hose Assembly - Aftermarket | Bedford 13-482
PriceQuantity
205143
MPN:13-482
Manufacturer:Bedford Precision Parts
Guaranteed safe & secure checkout
Graco 205143 Fluid Hose Assembly - Aftermarket Replacement | Bedford 13-482
Keep material moving smoothly with this 50-foot, 3/8″ ID aftermarket fluid hose assembly. It replaces OEM Graco 205143 and matches Bedford 13-482, providing dependable flow, reduced pressure drop on longer runs, and clean connections for professional finishing rigs.
Why Choose This Hose
- Direct aftermarket replacement engineered to OEM length and diameter (50′ x 3/8″ ID).
- Helps minimize pressure loss on higher-volume jobs for consistent fan and film build.
- Female swivel ends for quick coupling to pump outlets, manifolds, and guns.
Typical end style: 3/8″ NPSF female swivel (verify your rig before ordering).
Typical Compatibility
- Graco airless sprayer platforms that accept a 3/8″ material hose.
- Hydra-Clean washdown packages using divorced Monark/President lowers (material line).
- Pressure-pot and transfer pump systems requiring 3/8″ fluid lines.
Fits applications where the original part number matches the OEM listing below.
What This Hose Fits
- Graco systems calling out OEM hose 205143 (50′ × 3/8″ ID) in their parts lists.
- Material runs between pump outlet/manifold and gun whip hoses on production rigs.
- Hydra-Clean package plumbing where a 3/8″ material hose is specified in installation steps.
Cross-reference: Bedford Precision 13-482 lists 205-143 (Graco) as the OEM replacement; also cross-listed against Binks 71-3304 and DeVilbiss HA-7350.
Technical Specifications
| Aftermarket # | Bedford 13-482 |
|---|---|
| OEM # | 205143 (Graco) |
| Fits | Graco 3/8″ material hose applications; Hydra-Clean/airless systems (see list above) |
| Type | 50′ × 3/8″ Material/Fluid Hose Assembly |
| Material | Industrial hose with female swivel ends (3/8″ NPSF typical) |
| Function | Transfers coating/cleaning fluids from pump to gun/manifold with reduced pressure loss |
| Pressure | Use within your sprayer/rig rating; verify before service |
| Brand | Bedford Precision Parts (Aftermarket for Graco) |
Installation Notes
- Relieve system pressure; shut off air/electric power.
- Apply compatible thread sealant where required; connect pump outlet to hose inlet.
- Connect hose outlet to gun whip or manifold; avoid tight radius bends.
- Secure hose runs with clamps/guards; check for rub points.
- Pressurize slowly and leak-check before full-load operation.
Real-world tip: Use a short 1/4″ whip at the gun for flexibility; keep the 3/8″ trunk line straight to minimize drop.
When to Rebuild / Replace
- Kinks, blisters, or abrasion exposing reinforcement.
- Fittings weeping under pressure or damaged swivels.
- Notable pressure loss or surging at normal flow.
- Hose date exceeds your maintenance interval or local safety standard.
Bedford vs OEM (Graco)
| Feature | Bedford Aftermarket | OEM (Graco) |
|---|---|---|
| Fit & Length | 50′ × 3/8″ ID, OEM-matched | Factory original 50′ × 3/8″ ID |
| Connections | Female swivel ends (3/8″ NPSF typical) | OEM swivel ends for Graco rigs |
| Value | Cost-effective with broad cross-refs (Binks/DeVilbiss/Graco) | Premium OEM pricing |
| Availability | If in stock, ships from Bedford Precision Parts in Bedford Hill, New York. | Ships via Graco distributor network |
