Graco 15J197 Bearing Aftermarket | Bedford 42-3648

PriceQuantity

$ 22.17

Part #:

15J197

MPN:

42-3648

Manufacturer:

Bedford Precision Parts

Guaranteed safe & secure checkout

In Stock

Graco 15J197 Bearing Aftermarket Replacement | Bedford 42-3648 - High-Performance Rotary Component

The Bedford 42-3648 represents a precision-engineered aftermarket replacement for the Graco 15J197 bearing assembly, manufactured to exact OEM specifications with enhanced material composition. This critical rotary component ensures optimal performance in high-pressure fluid handling systems, delivering exceptional wear resistance and dimensional stability under continuous operation.

Aftermarket Value Precision Engineered Heavy-Duty Construction

Engineering Advantages

Precision-ground raceways for reduced friction and vibration
High-carbon chromium steel construction for extended service life
Advanced sealing technology prevents contaminant ingress
Thermally stabilized for consistent performance under load cycles

Primary Applications

Graco airless paint pump drive systems
High-pressure fluid transfer equipment
Industrial spray application systems
Contractor-grade pumping equipment

Compatible with Graco models requiring part number 15J197.

Compatible Equipment

Graco airless paint pumps with 15J197 bearing specifications
Professional contractor spray systems
Industrial fluid handling equipment
High-volume material application systems

If your equipment specifies Graco 15J197, Bedford 42-3648 provides direct replacement functionality.

Technical Specifications

Aftermarket	Bedford 42-3648
OEM	Graco 15J197
Bearing Type	Deep Groove Ball Bearing
Material	High-Carbon Chrome Steel
Sealing	Integrated Contact Seals
ABEC Rating	ABEC 1 Precision Class
Operating Temp	-20°F to 250°F (-29°C to 121°C)
Brand	Bedford Precision Components

Installation Protocol

Disconnect power source and depressurize system completely
Clean housing bore and shaft to remove contaminants
Apply appropriate mounting pressure to inner race only
Verify proper alignment before final assembly
Conduct operational test under controlled conditions

Technical Note: Use proper bearing installation tools to prevent raceway damage during press-fitting operations.

Failure Indicators

Audible grinding or rumbling during operation
Excessive shaft play or vibration
Overheating of housing assembly
Increased power consumption
Contaminant leakage past seals

Bedford vs OEM

Feature	Bedford Aftermarket	OEM (Graco)
Dimensional Accuracy	Precision-machined to OEM tolerances	Original factory specifications
Material Composition	High-carbon chrome steel with hardening	Factory-grade bearing steel
Load Capacity	Rated for continuous duty cycles	Designed for industrial applications
Sealing System	Integrated low-friction contact seals	Original sealing configuration

Frequently Asked Questions

What is the expected service life of this bearing?

Under normal operating conditions and proper maintenance, the Bedford 42-3648 bearing provides service life comparable to OEM specifications, typically exceeding 2,000 operational hours in contractor-grade equipment.

Is lubrication required before installation?

The bearing comes pre-lubricated with high-temperature grease suitable for most applications. Additional lubrication is typically not required unless specified in your equipment maintenance manual.

What maintenance interval is recommended?

Regular inspection every 500 operating hours is recommended, with thorough cleaning and re-lubrication if exposed to heavy contaminant conditions. Always follow equipment manufacturer guidelines.

Are these bearings sealed or shielded?

The Bedford 42-3648 features integrated contact seals on both sides, providing superior protection against contaminant ingress while maintaining smooth operation.

Where does it ship from?

If in stock, orders ship from Bedford Hill, New York with expedited shipping options available for urgent requirements.

Graco 15J197 Bearing Aftermarket | Bedford 42-3648